Boca Bearing Company

Full Ceramic Bearings are made entirely of ceramic material and are superior to common steel bearings in many ways. Ceramic is the perfect material for any application seeking to achieve higher RPMs, reduce overall weight or for extremely harsh environments where high temperatures and corrosive substances are present. Applications such as cryopumps, medical devices, semiconductors, machine tools, turbine flow meters, food processing equipment, robotics and optics. Ceramic materials commonly used for bearings are Silicon Nitride (Si3N4), Zirconia Oxide (ZrO2), Alumina Oxide (Al2O3) or Silicon Carbide (SiC.)
Because ceramic is a glass like surface it has an extremely low coefficient of friction and is ideal for applications seeking to reduce friction. Ceramic balls require less lubricant and have a greater hardness than steel balls which will contribute to increased bearing life. Thermal properties are better than steel balls resulting in less heat generation at high speeds. Full Ceramic bearings can have a retainer or full complement of balls, retainer materials used are PEEk and PTFE.

Full ceramic bearings can continue to operate under extremely high temperatures and are capable of operating up to 1800 Deg. F. Ceramic is much lighter than steel and many bearings are 1/3 the weight of a comparable steel bearing. Full ceramic bearings are highly corrosion resistant and will stand up to most common acids, they will not corrode in exposure to water or salt water. And finally full ceramic bearings are non-conductive.

The purpose of a radial bearing is to reduce rotational friction and support loads. This is achieved by using two races to hold the balls and to spread the load through the balls. As the bearing race rotates it causes the balls to rotate. The ball provides for substantially less rolling resistance and coefficient of friction than if two flat surfaces were rotating.

Single-row, deep groove radial ball bearings are the most common bearing type, having a wide range of applications. Radial bearings are made with very high levels of precision and used in applications where rotational performance and low torque is necessary, but load is a secondary issue. Deep-groove bearings however do have higher load ratings for their size than shallow-groove ball bearings, but are also less tolerant of misalignment.

Ceramic hybrid ball bearings use ceramic balls. Ceramic balls weigh up to 40% less than steel balls, depending on size. This reduces centrifugal loading and skidding, so hybrid ceramic bearings can operate up to 50% faster than conventional bearings. This means that the outer race groove exerts less force inward against the ball as the bearing spins. This reduction in force reduces the friction and rolling resistance. The lighter ball allows the bearing to spin faster, and uses less energy to maintain its speed. Ceramic hybrid ball bearings use these ceramic balls in place of steel balls. They are constructed with steel inner and outer rings, but ceramic balls so they are known as hybrids.

Metric Inch DIMENSION PART # PRICE 3 x 10 x 4 103-PP/TP/C3 Z/S #5 AF2 $62.95 4 x 8 x 3 84-PP/TP/C3 Z/S #5 AF2 $48.95 4 x 10 x 4 104-PP/TP/C3 Z/S #5 AF2 $62.95 4 x 13 x 5 624-PP/TP/C3 Z/S #5 AF2 $69.95 4 x 16 x 5 634-PP/TP/C3 Z/S #5 AF2 $69.95 5 x 8 x 3 85-PP/TP/W3/C3 Z/S #5 AF2 $48.95 5 x 9 x 3 95-PP/TP/C3 Z/S #5 AF2 $48.95 5 x 10 x 4 105-PP/TP/C3 Z/S #5 AF2 $48.95 5 x 11 x 4 115-PP/TP/C3 Z/S #5 AF2 $48.95 5 x 11 x 5 685-PP/TP/C3 Z/S #5 AF2 $62.95 5 x 13 x 4 695-PP/TP/C3 Z/S #5 AF2 $69.95 5 x 14 x 5 605-PP/TP/C3 Z/S #5 AF2 $69.95 5 x 16 x 5 625-PP/TP/C3 Z/S #5 AF2 $69.95 5 x 19 x 6 635-PP/TP/C3 Z/S #5 AF2 $69.95 6 x 12 x 4 126-PP/TP/C3 Z/S #5 AF2 $69.95 6 x 13 x 5 686-PP/TP/C3 Z/S #5 AF2 $69.95 6 x 15 x 5 696-PP/TP/C3 Z/S #5 AF2 $69.95 6 x 17 x 6 606-PP/TP/C3 Z/S #5 AF2 $69.95 6 x 19 x 6 626-PP/TP/C3 Z/S #5 AF2 $69.95 7 x 19 x 6 607-PP/TP/C3 Z/S #5 AF2 $69.95 7 x 27 x 7 627-PP/TP/C3 Z/S #5 AF2 $69.95 8 x 12 x 3.5 128-PP/TP/C3 Z/S #5 AF2 $69.95 8 x 14 x 4 148-PP/TP/C3 Z/S #5 AF2 $69.95 8 x 16 x 5 688-PP/TP/C3 Z/S #5 AF2 $69.95 8 x 19 x 6 698-PP/TP/C3 Z/S #5 AF2 $69.95 All Mini Full Ceramic Series Radial-Full Ceramic Bearings Metric Sizes Inch Metric DIMENSION PART # PRICE 0.1250 x 0.2500 x 0.0937 R144-TP/C3 Z/S #5 AF2 $79.95 0.1250 x 0.3125 x 0.1406 R2-5PP/TP/C3 Z/S #5 AF2 $55.95 0.1250 x 0.3125 x 0.1406 FR2-5PP/TP/C3 Z/S #5 AF2 $83.95 0.1250 x 0.3750 x 0.1562 R2-PP/TP/C3 Z/S #5 AF2 $48.95 0.1250 x 0.5000 x 0.1710 R2A-PP/TP/C3 Z/S #5 AF2 $62.95 0.1562 x 0.3125 x 0.1250 R155-PP/TP/C3 Z/S #5 AF2 $79.95 0.1875 x 0.3125 x 0.1250 FR156-PP/TP/C3 Z/S #5 AF2 $69.95 0.1875 x 0.3125 x 0.1250 R156-PP/TP/C3 Z/S #5 AF2 $69.95 0.1875 x 0.3750 x 0.1250 FR166-PP/TP/C3 Z/S #5 AF2 $69.95 0.1875 x 0.3750 x 0.1250 R166-PP/TP/C3 Z/S #5 AF2 $69.95 0.1875 x 0.5000 x 0.1960 R3-PP/TP/C3 Z/S #5 AF2 $62.95 0.2500 x 0.3750 x 0.1250 FR168-PP/TP/C3 Z/S #5 AF2 $69.95 0.2500 x 0.3750 x 0.1250 R168-PP/TP/C3 Z/S #5 AF2 $69.95 0.2500 x 0.5000 x 0.1875 FR188-PP/TP/C3 Z/S #5 AF2 $69.95 0.2500 x 0.5000 x 0.1875 R188-PP/TP/C3 Z/S #5 AF2 $69.95 0.2500 x 0.6250 x 0.1960 R4-PP/TP/C3 Z/S #5 AF2 $83.95 0.2500 x 0.7500 x 0.2812 R4A-PP/TP/C3 Z/S #5 AF2 $83.95 0.3125 x 0.5000 x 0.1562 R1810-PP/TP/C3 Z/S #5 AF2 $89.95 0.3750 x 0.6250 x 0.1562 R1038-PP/TP/C3 Z/S #5 AF2 $69.95 0.3750 x 0.8750 x 0.2812 R6-PP/TP/C3 Z/S #5 AF2 $83.95 0.5000 x 0.7500 x 0.1562 R1212-PP/TP/C3 Z/S #5 AF2 $69.95 0.5000 x 1.1250 x 0.3125 R8-PP/TP/C3 Z/S #5 AF2 $111.95